Ski Binding is a very important part to hold your ski boots onto the skis and prevent you to avoid any possible accident. Let’s discuss some basic Ski binding guide to keep in mind before you are up for skiing.
1. Learn About Binding Anatomy
When you are up for skiing then you must know about the basics of skiing so as to do it as efficiently as possible. Like, it has two important parts of tow piece and the heel piece which ensure the precise performance of bindings. Same goes for brake part and the anti-friction device, you must know about basics of such parts before starting skiing. You can also look for used ski bindings available for sale to practice skiing at minimum investment and learn more about the process easily.
2. DIN Settings
Deutsches Institut für Normung (DIN) is an industrial standard scale used for “Release Force Settings” of ski bindings. It adjusts tension on front and back of the bindings to allow the easy release of boots from the bindings. DIN settings are referred to a torque rating which is calculated by the combination of your boot dimensions, your age and ability level to give the accurate release settings. It is recommended to get these settings done from a specialist rather than doing it yourself.
3. Binding Material
Material of binding holds a great importance in skiing as it leads to vary the important factors like durability, strength, shock absorption and power transmission. It is important to consider these factors especially when you opt for used ski bindings for available sale so as to ensure the quality is good enough to be brought.
Though ski bindings have built-in function to dampen the vibrations caused by skiing but you can have a separate option for this as well. Advanced bindings have a proper damping system usually contained in a riser plate.
5. Elastic Movement
Ski bindings are designed in a way to provide required elasticity for vertical and lateral movements before the skier releases the tension. It also allows the substantial absorption of shock when on bumps or while landings. In the learning phase, you need more elasticity to keep a balance and avoid accidents so it is better to go for used ski bindings for sale available for sale which have more elasticity than the new ones.
6. Riser Plates
These plates allow more leverage and helps in taking steeper lean angles. Riser plates are usually used when skiing is required to be done on hard or very icy snow. It allows to put more pressure on the edges and enable boots to drag on snow less leant over turns.
7. Anti-Friction Devices (AFD)
It is usually called as AFD which is fixed on a toe piece of ski under your backcountry ski boots and bindings and used to minimize the friction between your boot and the binding during a lateral release. The basic purpose of AFD is just to allow the smoother sideways sliding of boot during tension release.